Replacement cartridge for Hydroplast B35 mixer taps Esclusivo

Replacement cartridge for Hydroplast B35 mixer taps

HYDROPLAST original spare part

Features

Hydroplast B35 cartridge.

Brass rod for greater reliability,

picture 7×8

Maximum temperature limitation ring

Long Life silencer

Opening angle: 24 °

Mixing angle: 100 °

Installation tips

To ensure the best functioning and long life of the cartridge:

the seat of the tap: must be clean and free of incrustations, avoid grease, oil, paint and solvents

the hole in the tightening nut must be approximately 0.20 mm larger than the diameter of the cartridge collar

tightening: the ring nut must screw freely but without play and rest on the entire surface of the cartridge. Tighten with a torque of 1 ÷ 1.2 Kgm (10 ÷ 12 Nm) to avoid unnecessary overloads and ensure greater smoothness of operation

test: during tests without water, avoid repeated and improper activations. Avoid unnatural overloads on the lever even during packaging, transport and installation

installation: hot water temperature max 80 ° C, recommended 60-65 ° C. Supply pressure min. 0.1 bar, max 5 bar continuous, max 10 bar

occasional. Pressure difference between hot and cold water: recommended as low as possible (max 1.5 bar).

We recommend mounting filters on the water inlets.